Owner Manual

2012 Escalade Sports

For Customer Service Call 1-888-996-2729

STEP 2:

Attach P4 End Leg Panels between two legs of P2 Right Legs and P3 Left Legs using pre-drilled pilot holes

with H3 Screws as shown in FIGURE 2. Tighten, but do not strip out H3 screws.

PARTS REQUIRED:

12 pcs - H3 Phillips Washer Head Screw 2 pcs - P4 End Leg Panel

8 pcs - H4 Phillips Washer Head Screw 2 pcs - P5 Side Leg Panel

FIGURE 2

STEP 3:

Attach P5 Side Leg Panels between and inside P2 Right Legs and P3 Left Legs using pre-drilled pilot holes

with H4 Screws as shown in FIGURE 3. Tighten, but do not strip out H4 screws.

Use T1 Allen Wrench to tighten all H1 Leg Bolts.

FIGURE 3

NOTE: P4 End Leg Panels

are packed under the table

cabinet and underneath

styrofoam block.