Owner Manual

C4-A

C4-B

C4-C

C4-B

C12

C11

STEP TWO :

Unscrew Screw (C9) to remove Corner Caps (C10)

from the table top rail.

STEP THREE :

Unscrew Knob Bolts (C11) and remove Side Top Rail

from Air Hockey Table Cabinet . And carefully

unplug the LED Rail Light .

Replacement of LED Rail Lights

C10

C11

STEP FOUR :

Unscrew Screws (C12), and separate LED Rail Lights from each other, by gently pulling apart.

Align the male and female connectors of the working LED Rail Lights , and install them back into

Side Top Rail using Screws (C12) as shown in the diagram.

Next, connect the plug of LED Rail Light A (C4-A).

Install back and screw Side Top Rail to the Air Hockey Table Cabinet using Knob Bolts (C11).

Lastly, Install Corner Caps (C10) back using Screw (C9).

Tighten, but do not strip out screws (C8) and (C9)

STEP ONE :

Should the LED lights not be working in the rail - Firstly , make sure the wall outlet cord is plugged in to a live A/C

outlet properly. Secondly , make sure the ON/Off Switch

(C1)

is in the "ON" position . Thirdly , make sure the A/C

Adapter

(C2)

is tightly plugged in to its outlet under the table . Lastly, make sure all

(C4)

(C6)

connections are

snuggly plugged into the Junction Box

(C3)

. At this point , should the LED Rail Lights still not be working ,

please disconnect the A/C power to the table before proceeding .

A call will be required to our Customer Service Department

to acquire the necessary replacement part(s) .