Specifications

•50
Reassembly of Front Cover & Diaphragm
Reassembly of Front Cover & Diaphragm
Hold the diaphragm to the light and
Hold the diaphragm to the light and
check for tears or holes. Replace if
check for tears or holes. Replace if
needed. Replace the diaphragm into
needed. Replace the diaphragm into
the plastic case. Make sure the lip of
the plastic case. Make sure the lip of
the diaphragm is seated into the
the diaphragm is seated into the
groove and that it is straight.
groove and that it is straight.
Place the inner ring into the back of
Place the inner ring into the back of
the front cover. Place the front cover
the front cover. Place the front cover
with the ring into the top of the
with the ring into the top of the
diaphragm.
diaphragm.
Make sure the logo is oriented
Make sure the logo is oriented
correctly.
correctly.