Specifications

•48
Adjustment
Adjustment
The initial adjustment of the orifice
The initial adjustment of the orifice
is fully retracted. Insert a 3/16
is fully retracted. Insert a 3/16
”
”
hex
hex
wrench into the nipple and unscrew
wrench into the nipple and unscrew
it (counterclockwise) until it stops.
it (counterclockwise) until it stops.
Remove the wrench and install the
Remove the wrench and install the
quick disconnect. Slowly pressurize
quick disconnect. Slowly pressurize
the regulator. Check that the lever is
the regulator. Check that the lever is
loose and has plenty of free
loose and has plenty of free
play.(1/16
play.(1/16
”
”
free play)
free play)
(1/16
(1/16
”
”
)
)