Specifications

10 minutes later. Repeat this process for a maximum of three times.
The Up button is a snooze button. When the alarm starts, press the Up button to stop the buzzer.
However, the buzzer will continue to ring 5 minutes later. The snooze function only happens on
the first press.
If the Up button is pressed for two seconds, the buzzer will be stopped, and no snooze will occur
6. Side touch button
adjust the brightness of the clock(3 modes), open and close the display when short touch .
6.) Test items and standards
Instruments/Tools: Mobile phone/watch, adjustable power supply, Type-C charging cable,
charging test box, 5V2A adapter, temperature gun,
Clock night light test
working voltage
4.2V battery
charge current
400MA
Battery
Battery specification 18650 Capacity1200mah-1800mah
Led power
1.3W MAX
instructions
Night light: short press the touch area (3 moded) to switch on and off the light
and the color grade, and long press to adjust brightness
Alarm clock function test
The alarm function takes effect only when the alarm time is set to on for one set of alarms.
When the alarm clock buzzes, press the Up button during the buzzer to stop the buzzer. If no
button is pressed within 30 seconds, the buzzer will be suspended and the alarm will start again
10 minutes later. Repeat this process for a maximum of three times.
The Up button is a snooze button. When the alarm starts, press the Up button to stop the buzzer.
However, the buzzer will continue to ring 5 minutes later. The snooze function only happens on
the first press.
If the Up button is pressed for two seconds, the buzzer will be stopped, and no snooze will occur