User Guide

1 2
Get the app
Download the Atomi Sma app
from the App Store or Google Play.
Register
Follow the on-screen instructions and register an account.
v1.06/21
Atomi Sma
GET
Register
4
Add your Atomi Sma device
Press “Add Device” or the “+” sign and
select “Go to add” on the popup that appears
Add Device
5
WiFi
Password
Continue
Select the right network
Enter your home WiFi name and
password, then press “Continue”
Make sure you’re connected to a 2.4GHz WiFi network
(Atomi Sma can’t connect to 5GHz networks).
If the popup does not appear, close the app and try again.
Still nothing? Read the “Troubleshooting” section on this user guide.
If not flashing, press and hold the Power buon for 10s to reset.
Make sure to allow access to Location (Android),
Bluetooth and Local Network (iOS).
Let’s get staed!
Sma WiFi
Infrared Heater
Quick Sta Guide
TO AVOID THE RISK OF AN ELECTRICAL SHOCK, always make sure that the
Sma Heater is unplugged from the electrical outlet before relocating,
servicing, or cleaning it.
CAUTION: To prevent an electric shock, match wide blade of plug to wide
outlet slot and fully inse.
When using electrical appliances, basic safety precautions should always be
followed to reduce the risk of fire, electric shock, and/or injury to people,
including the following:
1. READ ALL INSTRUCTIONS BEFORE USING.
2. The Sma Heater is hot when in use. To avoid burns, do not let bare skin
touch the hot suaces. Use the back handle of the heater when moving.
Keep combustible materials such as furniture, pillows, bedding, papers,
clothes, and cuains at least three feet (0.9 m) away from the front of the
heater and keep them away from the sides.
3. Extreme caution is necessary when the heater is being used by or near
children and whenever the heater is le operating and unaended.
4. Do not operate if the cord or plug has been damaged, if the heater
malfunctions, or if it has been dropped or damaged in any manner.
5. Do not use outdoors.
6. The Sma Heater is not intended for use in bathrooms, laundry areas, nor
similar indoor locations. Never place the heater where it may fall into a
bathtub or water container.
7. Do not run the cord under carpeting. Do not cover the cord under throw
rugs, runners, or similar coverings. Do not route the cord under furniture or
appliances. Arrange the cord away from high-trac areas where it could
be tripped over.
8. To disconnect the Sma Heater, turn controls to “O”, then remove the
plug from the outlet.
9. Connect to standard outlets only.
10. Do not inse or allow foreign objects to enter any ventilation or exhaust as
this may result in an electric shock or fire. It may also damage the Sma
Heater.
11. To prevent possible fire, do not block air intakes or exhaust in any manner.
Do not use on so suaces like a bed where openings may be blocked.
POLARIZED PLUG
This Sma Heater has a polarized plug (one blade is
wider than the other).
As a safety feature to reduce the risk of electrical
shock, this plug is intended to fit in a polarized outlet
only one way. If the plug does not fully inse into the
outlet, try reversing plug.
IMPORTANT SAFEGUARDS
12. The Sma Heater has hot and arcing or sparking pas inside. Do not use
it in areas where gasoline, paint, or flammable liquids are used or stored.
13. Use this Sma Heater only as described in this user manual. Any other
use not recommended by the manufacturer may cause fire, electric
shock, or injury to people.
14. Always plug the Sma Heater directly into a wall outlet/receptacle. Never
use it with an extension cord or relocatable power tap (outlet/power strip).
NOTE: This appliance is for HOUSEHOLD USE ONLY.
ELECTRIC POWER
If the electric circuit is overloaded by other appliances, your Sma Heater
and/or appliances may not operate properly. The Sma Heater should be
operated on a separate electrical circuit from other operating appliances.
Before you begin
1. Remove tie from the power cord and unravel the cord. Keep the plastic
wrapping away from children.
2. Install the Sma WiFi Infrared Heater on the wall or place it on the floor
with the included feet.
3. Know your Wi-Fi network and password.
4. Make sure that you are operating on:
• iPhone
®
8 or higher and iOS
®
8 or higher.
Any previous iPhone
®
or iOS
®
may experience slower connections.
• Android™ 4.1x or higher.
5. Make sure that you’re connected to a 2.4GHz Wi-Fi network (Atomi Sma
app can’t connect to 5GHz networks).
3
Plug in your Atomi Sma device
Use the switch on the back to turn it on
and confirm that the WiFi indicator is flashing.
List of main pas
Control Buons
Control
Buons
Heat
Output
Intake
Ve n t
(both sides)
Power
Switch
Solid
Base
Installation
Sma WiFi
Infrared Heater
Wall Installation
1. Use the included level to ensure you
mark the guide holes correctly.
2. Drill holes for included anchors.
Inse included anchors and screws.
3. Hang the heater onto the screws.
Timer
ECO
High
Low
F
Timer
Set timer to run from 1-12
hours. When using this
seing, heater will power
o aer the selected hours.
Mode
Press to change from LOW and HIGH.
Wi-Fi
Buon
LED Display
ON/OFF
Temperature Control
Set desired room temperature.
Temperature will blink while
adjusting. The heater may take
up to five seconds to respond.