Replacement Part List

13 14
3. Connect the white and red wires running from the
Sma Garage Door Opener to the corresponding
screw on the back of your garage door opener
panel i.e white to white and red to red
4. Secure the garage door opener panel back to the
wall and position your Sma Garage Door Opener
right above it.
5. Use the screws included in your product
packaging to secure the Sma Garage Door
Opener's backing onto the wall.
6. Plug the Sma Power Adaptor into your desired
wall outlet.
7. Adjust and position the camera on your Sma
Garage Door Opener and test the view on the atomi
sma app to make sure you are happy with the
facing angle.
8. Testing the device:
a) Open the app, choose "Sma Garage Door
Opener" and press the light icon buon. Check if
the device light is turning ON/OFF.
b) Press the camera icon buon. You should receive
a notification with the captured photo.
c) Slide up the switch to open your garage door.
Check if your garage door is opening.
d) Slide down the switch to close your garage door.
Check if your garage door is closing.
If you have problems with any of these steps. see
our FAQs section on this guide or visit
atomisma.com for more information.