Integration Manual

User’s Guide
Page 4 of 4
3.3 Important Compliance Information For North American Users
The M52840-QI module, upon commercial release, will have been granted modular approval for
mobile applications. Integrators may use the module in their final products without additional
FCC/IC (Industry Canada) certification if they meet the following conditions. Otherwise,
additional FCC/IC approvals must be obtained:
1. At least 20 cm separation distance between the antenna and the user’s body must be
maintained at all times.
2. A label must be affixed to the outside of the end product into which the M52840-QI
module is incorporated, with a statement similar to the following: · This device contains
FCC ID: 2AT8A-M52840-QI-V1 Contains transmitter module IC: NRF52840-QIAA
3. A user manual with the end product must clearly indicate the operating requirements
and conditions that must be observed to ensure compliance with current FCC/IC RF
exposure guidelines.
The end product with an embedded M52840-QI module may also need to pass the FCC Part 15
unintentional emission testing requirements and be properly authorized per FCC Part 15.
WARNING! Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.