User's Manual

INSTALLATION

Please follow this quick set-up guide to ensure trouble free installation of your

headphones.

Step 1:

Connect the 3.5mm Stereo Audio Cord (17) to the audio output socket (i.e. PHONE/

HEADPHONE 3.5mm socket) of your audio source, e.g. TV, HiFi, CD, DVD player etc.

*** If your audio source has 2 RCA output sockets (red and white in colour), use the

90mm Y-connection Cord (16) for connection, if necessary.

Step 2:

Connect the other end of the 3.5mm Stereo Audio Cord (17) to the Audio IN Socket (13)

at the rear side of the transmitter.

Step 3:

Connect one end of the AC/DC Adaptor (18) to the DC IN Socket (15) at the rear side of

the transmitter, and the other end to the main electric wall outlet.

Step 4:

The transmitter will be automatically ON when there is audio signal from the audio

source (please make sure that the transmitter is powered on by the AC/DC adaptor in

Step 3). Then the Power LED Indicator (11) will glow Green to confirm that the

transmitter is ready for operation. Place the transmitter on a dry, cool place preferably

above head level.

*** The transmitter has auto-cut-off function. When there is no audio signal for over

70+/-10 seconds, the power of the transmitter will be automatically cut off.

Step 5:

Open the Battery Cover (9). Insert 2 pcs AAA size batteries into the Battery

Compartment (8) at the Left hand side of the headphones observing the correct polarity.

Then close the Battery Cover (9), and switch the headphones ON (3).

Step 6:

Switch on your music device (TV. HiFi, CD, DVD etc.) and start your media playing.

Step 7:

Adjust the channel Tuning Knob (4) Select the Correct channel and The good quality

sound. Adjust the Volume Control Knob (5) to a comfortable sound level.