Congratulations on the purchase of RF-9366-01ST (900MHz) Stereo RF Wireless Wooden Speakers to enjoy the revolutionary technology of Phase Lock Loop (PL! Please check the supplied component against the following list: 2 x Wooden Speakers I x Transmitter 1 x Power Supply (AC/DC 12V 200mA adapter for transmitter) 2 x Power Supply (AC/DC 13V 1.5A adapter for speakers) 1 x 3.5mm Stereo Audio Cord (1.5m) 1 x 3.
' TRANSMITTER Transmitter Upper Surface: (14) Power LED Indicator Transmitter Bottom: (15) Channel CHINCHILLA Switch Transmitter Rear Side: (16) Audio IN Socket (17) DC IN Socket (18) Antenna ACCESSORIES (19) 3.5mm Stereo Audio Cord (1.5m) (20) 3.
INSTALLATION Please follow this quick set-up guide to ensure trouble free installation of your Speakers, Step 1: Fix the Antenna Cord into the Antenna Tube (18) at the top of the transmitter. Step 2: Connect the 3.5mm Caster Audio Cord (19) to the audio output socket (ic. Phone/ Headphone 3.5mm socket) of your audio source, e.g. TV, WiFi, CD, DVD player «tc. If your audio source has 2 RCA output sockets (red and white in color), use the 90mm Y-connection Cord (20) for connection, if necessary.
Step 8: Switch ON (1) the speakers, it will automatically match the channel selected in the transmitter, and the 3 Channel Color LED Indicator (6) shows the per-set color. Then you can hear 4 good quality sound. Adjust the Volume Control Button (2), Bass Control Button (3) and Mode Button (9) to a comfortable sound level, CHANNEL SELECTION There are 3 channels altogether for the PLL Wooden Speakers. At the bosom of the transmitter, there is a Channel CH1/CH2/CH3 Switch (15).
Step 3: Connect the end of AC/DC 13V 1.5A adapters (12) into DC IN Socket (8) at the rear side of each speaker, and the other end to the main electric wall outlet. The Recharging LED Indicator (5) will glow RED to show that the speaker is being charged. ‘When the batteries are full, recharging will stop automatically, and the Recharging LED Indicator (3) will turn off. Recharging procedure should never exceed 48 hours.
Step 3: Connect the end of AC/DC 13V 1.5A adapters (12) into DC IN Socket (8) at the rear side of each speaker, and the other end to the main electric wall outlet. The Recharging LED Indicator (5) will glow RED to show that the speaker is being charged. When the batteries are full, recharging will stop automatically, and the Recharging LED Indicator (5) will turn off. w*+ Recharging procedure should never exceed 48 hours.
(5) Last Memory Retain: ~ If your speakers system is continuously connected with electricity, the last memory of the channel will be retained after you have switched off the speakers. If you have cut and reconnected the electricity, the speakers will automatically search the channel when you power on again. The 3 Channel Color LED Indicator (6) will Shaw the preset color. (6) Power auto-cut-off: _ The transmitter has auto-cut-off function.
SPECIFICATIONS Mode! Description Transmitter No.
