Installation Guide

DIGITAL BOARD INSTALLATION
DA200
Reminder: The DA200 digital board includes:
1) Unscrew the rear plate (3 screws).
2) Place the plastic button (hiding the
Bluetooth antenna) and fix the board
on the chassis.
In case of IN50, 80, 100 and PR200 Signature it is necessary to wait 5 seconds of
initialization before being able to exit standby at the first power on.
INSTALLATION DIGITAL BOARD
FOR IN & PR SIGNATURE
• 1 Bluetooth receiver.
• 2 Coaxial inputs (24 bits/192 kHz).
• 2 Optical inputs (24 bits/192 kHz).
• 1 USB-B input: PCM (16 bits to 32 bits up to 384 kHz) & DSD (64 & 128).
To use the USB-B asynchronous input, you need to download a driver on your
computer using Windows software. You can find it here:
https://www.atoll-electronique.com/fr/produits/ampli-preampli-integres/integre-in300-copy/
CHC3x6 screw CHC3x6 screw
2 sheet metal screws
3) Connect the flat cable on the
main board connector.
Before any operation, switch off your appliance.