Owner's Manual

ATOLL ELECTRONIQUE
OWNER’S MANUAL ~ AMPLIFIER
AM100 Sig
ATOLL ELECTRONIQUEPage 3Page 6
E.C. marking certified the conformity with low tension directive 73/23/CEE, directive
CEM 89/336/CEE and national transpositions.
E.C. MARKING
Before any cleaning, switch off your appliance. Use a soft and dry rag to clean up the
device. Never use acetone, white-spirit, ammoniac, or any kind of product containing
an abrasive agent.
Never try to clean up inside the appliance.
The guarantee is two years long from date of purchase. We recommend you to ask
your dealer to fill the guarantee and to conserve it. The guarantee is only available
for appliance which have been use correctly.
CLEANING
GUARANTEE
TECHNICAL DATA
Power:
Impulse Power:
Supply:
Total of capacitors:
Number of Inputs:
Input Impedance:
Sensibility:
Signal/Noise ratio:
Distortion at 1kHz:
Bandwidth:
Rising Time:
Dimensions:
Weight:
100 W /canal /8Ω
140 W /canal /4Ω
180 W /canal
2×340 VA
32 247 µF
2
47 kΩ
1,77 V
100 dBA
0,05% / 10 W
5 Hz - 100 kHz
1,3 µs
440×255×90 mm
11,0 kg
CAUTIONS
• Do not make any connections when your device is powered on.
• Put your amplifier in a dry and well ventilated place, far from source of
heat.
• Do not put something on your amplifier.
• Avoid any short-cut.
• Respect polarity
+
& and switch left & right:
• Do not plug in two speakers in parallel on the same output.
ADVISES
• To optimize the performance of your device, you should switch it on at
least half an hour before any listening, the time for the power stage to
reach its ideal working temperature.
• Your device will give you optimal listening quality after this time-lapse.
• Between two uses, it is, therefore, preferable to let the device on so that
it remains at its optimum temperature.
• At night or when you leave your home, it is best to use the main switch
to turn off the device.
• To optimize the sound quality of your system, we recommend that you
choose good-quality connection cords. Do not hesitate to ask your
specialist dealer for advice.
• Your Amplifier is equipped with a temporised switch on. A relay
protects loudspeakers on output power stage from over-voltage.