- American Technologies Network Binoculars user`s guide ATN NVG7

eATres

• High Quality 2

or 3

or 4

gen. light intensifier tube

• Super fast lens system provides the user with a clear and sharp image

• Dual eye viewing system for long viewing sessions

• Built-in Infra Red illuminator lets you see even in total darkness

• Interchangeble lenses for different magnification

• Head or helmet mounted for hands free use

• Rugged and versatile design

• Easy to use digital controls

• Two years warranty

SpecificATioNS

Magnification .................................................. 1X (3X,5X optional)

Intensifier tube ................................................ Gen. 2 or Gen.3 or Gen.4

Detection range .............................................. 150(Gen.2) or 200(Gen.3) or 300(Gen.4)m/y

Recognition range .......................................... 100(Gen.2) or 180(Gen.3) or 225(Gen.4)m/y

Lens System ................................................... 35 mm; F1:1.2

Field of view .................................................... 40°

Range of Focus ............................................... 0.25m to 

Power Supply .................................................. 3 volt lithium

Battery Life ..................................................... 10 hours

Operating Temp. ............................................. -30°F to +110°F

Dimensions ..................................................... 172x62x102 mm (6.7” x 2.5” x 4”)

Weight ............................................................. 0.45kg (0.9 lb)

ApplicATion

Compact and lightweight, rugged (metal not plastic), and a top-notch performer the NVG-7 is

an exceptional choice for hands free usage.

The NVG-7 goggles have a built in IR for total darkness with indicator “ON” light within the FOV

and a flip-up headset.

The NVG-7 is available with a wide range of image intensifier options to meet a wide array of

specification requirements.

The NVG-7 night vision goggles is a complex opticoelectronic system for individual use. The

device consists of the objective lens assembly, eyepiece and the body. The body contains a

image intensifier tube assembly with an integrated high voltage power source and the battery

housing.

Objective lens protective cover (not shown) is intended to protect the objective lens from dust

and scratches. It also will act as a daylight filter, allowing you to test the scope in daylight or

other bright light situations. The pinhole in the center of the protective cover allows the user to

check the operation ability of the device in daylight conditions.

NOTE: Do not test the scope in daylight conditions even with the daylight filter/lens cap on for

more than ten (10) minutes.