Product specifications

Introduction
The Atmos Multi gas fired storage combination
boiler meets the requirements of Statutory
Instrument 'The Boiler (Efficiency) Regulations'
and is deemed to meet the requirements of:
 Gas Appliance Directive 90/396 EEC
 Efficiency Directive 92/42/ EEC
 Low Tension Directive 73/23 EEC (modified
from 93/68) and;
 Electromagnetic Compatibility Directive
89/396 EEC (modified from 93/68)
Atmos Heating Systems declare that the materials
used in the manufacturer of this appliance are
non-hazardous and that no substances harmful to
health are contained within the appliance.
The Atmos Multi must be installed in accordance
with these instructions and the regulations
currently in force. Please read these instructions
fully before installation and leave with the boiler
for future reference.
Atmos Heating Systems accepts no responsibility
for unsatisfactory performance of the appliance or
flue arising from the failure to comply with these
installation instructions.
On completion of installation the appliance must
be commissioned and the following explained to
the user:
 The operating principle of the appliance
 The appliance controls and display
 Starting up, filling and de-aerating the
appliance
 Shutting down and draining
 Annual inspection and maintenance
Atmos Heating Systems have a policy of
continuing improvement in the design and
performance of its products. The right is therefore
reserved to vary specifications without notice.
For advice or information contact Atmos Heating
Systems by telephone or e-mail.
ATMOS MULTI Mk 2 version 2008
Page 4