Operating instructions

ManualsBrandsAtmos ManualsBoilerHE40C

Atmos InterSystem

User Operating Instructions for HE26 & HE40C

(GC 41-249-05 & GC 41-249-07)

Atmos Heating Systems

West March

Daventry

Northants, NN11 4SA

Tel: 01327 871990

Fax: 01327 871905

e-mail: sales@atmos.co.uk

internet: www.atmos.co.uk

Issue 1.11.11 (Main revision)

Summary of content (4 pages)

PAGE 1
Atmos InterSystem User Operating Instructions for HE26 & HE40C (GC 41-249-05 & GC 41-249-07) Atmos Heating Systems West March Daventry Northants, NN11 4SA Tel: 01327 871990 Fax: 01327 871905 e-mail: sales@atmos.co.uk internet: www.atmos.co.uk Issue 1.11.
PAGE 2
© 2011 Atmos Heating Systems The information provided applies to the product in the standard model. Atmos Heating Systems can therefore not be held liable for any damage resulting from the product specifications that deviate from the standard model. The information provided has been compiled with the utmost care. However, Atmos Heating Systems cannot be held liable for any faults in the information nor for the consequences thereof.
PAGE 3
User Operating Instructions for Atmos InterSystem HE26 & HE40C First ask your installer to instruct you thoroughly about filling, deaerating and general use of the appliance and the total installation. Central Heating (CH) operation & Tank (if applicable) The controller adjusts the fan speed, and hence the heating power, according to the set CH supply water temperature, the latter being displayed on the temperature display.
PAGE 4
Adjustment of CH supply temperature Press the Temperature button (B) for approx 2 seconds until the LED CH and the display start to flash (the display shows the set temperature). Change the temperature using the “+” and “-“ buttons, adjustable between 30ºC and 90ºC. Press the Reset button to store the changes (or press the On/Off button to close the menu without storing the changes). Note: After 30 seconds of no action, the changes will automatically be stored and the controller will return to normal.