Full Product Manual

6
Starting the System for the First Time
01
03
0201
0403
Open the water tap (10)
to a gentle ow. Slowly
increase the ow until
the appliance lamp/s
light up. Wait 15 to 20
seconds for hot water to
ow out. Then adjust the
water temperature by
increasing/decreasing the
ow.
When nished using the
appliance, turn the switch to
the Off position
Select the desired heating level (6):
Setting Off
Setting 1: Low - 1.4 kW
Setting 2: Medium - 1.6 kW
Setting 3: High - 3.0 kW
Select the desired heating
level (6) reference step 1.
Electrical Diagram
1 2
45 3
L1
N
P
1. Switch (Option A): Off/On
Switch (Option- B): Off/1/2/3
(1-Medium, 2- High, 3- Very high)
2. Heating element (Option A):
1 Heating element
3. Thermostat set to cut off at 135°F
4. Heating elements (Option- B):
2 Heating elements:
Heating Position 1 – Medium
Heating Position 2 – High
Heating Position 3 – Very High
5. Pressure Switch (Option A):
1 Microswitch
Pressure Switch (Option B):
2 Microswitch