Datasheet

92
XMEGA B1 [DATASHEET]
Atmel-8330H-AVR-ATxmega64B1-128B1_datasheet–AVR–12/2014
Figure 37-3. Active Mode Supply Current vs. V
CC
f
SYS
= 32.768kHz internal oscillator.
Figure 37-4. Active Mode Supply Current vs. V
CC
f
SYS
= 2MHz internal oscillator.
Data sheet plot checklist
Please apply the following checklist to all data sheet plots:
[ ] Is the most recent revision of PlotTool.xlt and the PlotTool database being used?
[ ] Is the plotted data reasonable?
[ ] Has data outside of device specification been removed from the data set?
[ ] Has data outside of the plot region been removed from the data set?
[ ] Has "Analysis mode" been unchecked?
[ ] Has the Y axis been adjusted to best fit the data? Is the unit correct?
[ ] Has the X axis been adjusted according to data sheet requirement?
[ ] Has the Z axis legend been positioned correctly (correct order, no overlap)
[ ] Are there at least eight grid lines for both X and Y axis?
1500
2000
2500
3000
3500
4000
4500
5000
5500
6000
1.6 1.8 2 2.2 2.4 2.6 2.8 3 3.2 3.4 3.6
I
CC
[µA]
V
CC
[V]
105
85
25
-
40
Temp [°C]
105°C
85°C
25°C
-40°C
500
680
860
1040
1220
1400
1580
1760
1940
2120
1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6
Icc [µA]
V
CC
[V]