Datasheet

19
XMEGA B1 [DATASHEET]
Atmel-8330H-AVR-ATxmega64B1-128B1_datasheet–12/2014
Figure 9-1. Event System Overview and Connected Peripherals
The event routing network consists of four software-configurable multiplexers that control how events are routed and
used. These are called event channels, and allow for up to four parallel event configurations and routings. The maximum
routing latency is two peripheral clock cycles. The event system works in both active mode and idle sleep mode.
Timer /
Counters
USB
Real Time
Counter
Port pins
CPU /
Software
DMA
Controller
IRCOM
ADC
Event
System
Controller
clk
PER
Prescaler
AC
Event Routing Network