Datasheet

139
XMEGA B1 [DATASHEET]
Atmel-8330H-AVR-ATxmega64B1-128B1_datasheet–12/2014
39.5 8330D – 01/2013
39.6 8330C – 07/2012
39.7 8330B – 02/2012
39.8 8330A – 10/2011
1. Updated “Ordering Information” on page 2: Added -AUR, -CU and -CUR options.
2. Updated “Packaging Information” : Added package drawing for “7A1” on page 68.
3. Updated Table 32-5 on page 57: PDI and RESET pins updated.
4. Updated pin number for PR1 to pin 81 in Table 32-8 on page 59.
5. Updated “External clock with prescaler for system clock” Table 36-26 on page 84.
6. Added ESR parameter to the “External 16MHz crystal oscillator and XOSC characteristics.”
Table 36-27 on page 84.
1. Updated the Table 32-4 on page 57. PDI_CLOCK is on pin 16 and PDI_DATA on pin 15.
2. Updated the datasheet using the Atmel new template.
3. Updated “Errata” , “Rev. C” on page 136: “JTAG revision” replaced by “Device revision number”.
1. Updated the Table 7-2 on page 16. The page size (words) for ATxmega128B1 changed from
256 to 128.
2. Updated all “Electrical Characteristics” on page 69.
3. Updated all “Typical Characteristics” on page 91.
4. Updated “Errata” on page 136.
1. Initial revision.