Datasheet

138
XMEGA B1 [DATASHEET]
Atmel-8330H-AVR-ATxmega64B1-128B1_datasheet–AVR–12/2014
39. Datasheet Revision History
Note that the referring page numbers in this section are referred to this document. The referring revision in this section
are referring to the document revision.
39.1 8330H – 12/2014
39.2 8330G – 11/2014
39.3 8330F – 02/2014
39.4 8330E – 06/2013
1. Corrected description for VFBGA pinout in Table 2-1 on page 5.
1. Information for 105°C are added.
2. Several small changes are made to set up the document according to the new template.
3. AVDD in Table 32-2 on page 56 has been corrected to AVCC.
4.
Changed Vcc to AVcc in Section 29. “ADC – 12-bit Analog to Digital Converter” on page 49 and
Section 30. “AC – Analog Comparator” on page 51.
5. Added error information on USART transmitter to Section 38. “Errata” on page 136.
6.
Changed pin names in Table 2-1 on page 5
from VCC1, LVCC1 and LVCC01 to VCC
from GND1, LGND1 and LGND01 to GND
from D2W_D to PDI_DATA
7. Changed unit value for parameter t
SU;DAT
to ns in Table 36-30 on page 89.
8.
Corrected description for VFBGA pinout. Pin F2 changed from VCC to GND in Table 2-1 on
page 5.
1.
Added the correct VFBGA package drawing:
 Replaced the package 100C1 (CBGA) by the package 7A1 (VFBGA)
 Updated the package type in “Ordering Information” on page 2
 Updated the title in Figure 2-2 on page 5 and in the Table 2-1 on page 5
 Updated the package type in “Typical Characteristics” on page 91
2. Updated the title name of the Table 36-24 on page 82.
1. Added pinout for CBGA package option: Figure 2-2 and Table 2-1 on page 5.