Datasheet

124
8068T–AVR–12/10
XMEGA A3
37. Datasheet Revision History
Please note that the referring page numbers in this section are referred to this document. The
referring revision in this section are referring to the document revision.
37.1 8068T – 12/10
37.2 8068S – 09/10
37.3 8068R – 08/10
1. Datasheet status changed to complete: Preliminary removed from the front page.
2. Updated all tables in the “Electrical Characteristics” .
3. Updated ”Packaging information” on page 61.
4. Replaced Table 34-11 on page 69
5. Replaced Table 34-18 on page 71 and added the figure ”TOSC input capacitance” on page 71
6. Added ERRATA “rev. E” .
7. Added ERRATA “rev. B” .
8. Updated ERRATA for ADC (ADC has increased INL error for some operating conditions).
9. Updated the last page by Atmel new Brand Style Guide.
10. Updated ”Errata” on page 93.
1. Updated the Footnote 3 of ”Ordering Information” on page 2.
2. Updated Footnote 2 of Figure 2-1 on page 3.
3. Updated ”Data Memory Map (Hexadecimal address)” on page 11. 192A3 has 2 KB EEPROM.
4. Updated ”Features” on page 27. Event Channel 0 output on port pin 7.
5. Updated ”Absolute Maximum Ratings*” on page 63 by adding Icc for Flash/EEPROM
Programming.
6. Added AVCC in ”ADC Characteristics” on page 67.
7. Updated Start up time in ”ADC Characteristics” on page 67.
8. Updated ”DAC Characteristics” on page 68. Removed DC output impedence.
9. Updated Figure 35-6 on page 74. Replaced the figure by a correct one.
10. Fixed typo in “Errata” section.