Datasheet

237
ATmega8(L)
2486M–AVR–12/03
Electrical Characteristics
Note: Typical values contained in this datasheet are based on simulations and characterization of other AVR microcontrollers manu-
factured on the same process technology. Min and Max values will be available after the device is characterized.
DC Characteristics
Absolute Maximum Ratings*
Operating Temperature ................................. -55°C to +125°C
*NOTICE: Stresses beyond those listed under “Absolute
Maximum Ratings” may cause permanent dam-
age to the device. This is a stress rating only and
functional operation of the device at these or
other conditions beyond those indicated in the
operational sections of this specification is not
implied. Exposure to absolute maximum rating
conditions for extended periods may affect
device reliability.
Storage Temperature .................................... -65°C to +150°C
Voltage on any Pin except RESET
with respect to Ground ................................-0.5V to V
CC
+0.5V
Voltage on RESET with respect to Ground .....-0.5V to +13.0V
Maximum Operating Voltage ............................................ 6.0V
DC Current per I/O Pin ............................................... 40.0 mA
DC Current V
CC
and GND Pins................................ 200.0 mA
T
A
= -40°C to 85°C, V
CC
= 2.7V to 5.5V (unless otherwise noted)
Symbol Parameter Condition Min Typ Max Units
V
IL
Input Low Voltage Except XTAL1 pin -0.5 0.2 V
CC
(1)
V
V
IL1
Input Low Voltage XTAL1 pin, External Clock Selected -0.5 0.1 V
CC
(1)
V
V
IH
Input High Voltage Except XTAL1 and RESET pins 0.6 V
CC
(2)
V
CC
+ 0.5 V
V
IH1
Input High Voltage XTAL1 pin, External Clock Selected 0.8 V
CC
(2)
V
CC
+ 0.5 V
V
IH2
Input High Voltage RESET pin 0.9 V
CC
(2)
V
CC
+ 0.5 V
V
OL
Output Low Voltage
(3)
(Ports A,B,C,D)
I
OL
= 20 mA, V
CC
= 5V
I
OL
= 10 mA, V
CC
= 3V
0.7
0.5
V
V
V
OH
Output High Voltage
(4)
(Ports A,B,C,D)
I
OH
= -20 mA, V
CC
= 5V
I
OH
= -10 mA, V
CC
= 3V
4.2
2.2
V
V
I
IL
Input Leakage
Current I/O Pin
Vcc = 5.5V, pin low
(absolute value)
1 µA
I
IH
Input Leakage
Current I/O Pin
Vcc = 5.5V, pin high
(absolute value)
1 µA
R
RST
Reset Pull-up Resistor 30 80 kΩ
R
pu
I/O Pin Pull-up Resistor 20 50 kΩ