User guide

Evaluation Kit Hardware
4-58 Evaluation Kit (EK) User Guide
11115A–ATARM–27-Jul-11
4.3.5.13 ZigBee Socket J10
Figure 4-47. ZigBee Socket J10
4.3.5.14 LCD/ISI Socket J21
Figure 4-48. LCD/ISI Socket J21
Table 4-33. ZigBee Socket J10 Signal Descriptions
Function
Signal
Name
Port Pin Pin Port
Signal
Name
Function
Option on misc. port set by
OR or solder shunts
Reset /RST 1 2 Misc.
 EEprom for MAC
address, cap array
settings and serial
number
 TST: test mode
activation
 CLKM: RF chip clock
output
Interrupt
Request
IRQ 3 4 SLP_TR SLP_TR
SPI chip select /SEL 5 6 MOSI SPI MOSI
SPI MISO MISO 7 8 SCLK SPI CLK
Power Supply GND GND 9 10 VCC VCC VCC
Voltage range: 1.8v to 5.5v,
regulated to 3.3v
Table 4-34. LCD/ISI Socket J21 Signal Descriptions
LCD ISI Pin Num Pin Num ISI LCD
3V3 3V3 1 2 GND GND
VDDISI VDDISI 3 4 GND GND
ZB_IRQ0 ZB_IRQ0 5 6 ZB_IRQ1
TWCK0 TWCK0 7 8 TWD0
GND GND 9 10 ISI_MCK LCDDAT15
GND GND 11 12 ISI_VSYNC LCDDAT13
GND GND 13 14 ISI_HSYNC LCDDAT14