User guide

Evaluation Kit Hardware
4-40 Evaluation Kit (EK) User Guide
11115A–ATARM–27-Jul-11
4.3.4.3 Force Power ON Configuration
4.3.4.4 White Protection Configuration on MCI1
4.3.4.5 Selection between DBGU and CAN
4.3.4.6 Codec IIS Configuration
4.3.4.7 ETH0 Configuration
Table 4-11. Force Power ON
Designation Default Setting Feature
JP5 Close
Keep on-board regulator always on
Open to feature SHDN function
Table 4-12. Write Protection on MCI1
Designation Default Setting Feature
JP6 Close
MCI1 write protect selected
Open to disable protection
Table 4-13. Select DBGU or CAN
Designation Default Setting Feature
JP11 Close
Default to select DBGU
Open to select CAN0
Table 4-14. Codec IIS
Designation Default Setting Feature
R162, R164 Not Populated IIS master mode, clock the codec by PCK0
C121, C122, Y3 Populated
IIS slaver mode, clock the codec by
external crystal
Table 4-15. ETH0
Designation Default Setting Feature
R180, R183, R184,
R185, R185, R186,
R174, R175, R176
Not Populated
Populated to select the PHY channel on
CM. Channel on EK must be cut if select
the PHY on CM.
R177, R178, R179,
R181, R182, R218,
R171, R172, R173
Populated Selection of PHY channel on EK