User guide

Evaluation Kit Hardware
Evaluation Kit (EK) User Guide 4-15
11115A–ATARM–27-Jul-11
4.2.4.2 Boot Configuration
In order to use SAM-BA boot, the NAND Flash and SPI DataFlash must be deselected. SW1 is dedi-
cated to this purpose.
4.2.5 Connectors
Figure 4-10. CM Board Dimensions
Table 4-7. Boot Configuration
Designation Default Setting Feature
SW1 (1, 4) ON Set to OFF disables the NAND flash
SW1 (2, 3) ON Set to OFF disables the SPI DataFlash