User guide

21
6310A–ATARM–26-Mar-07
Application Note
It is also possible to set the speed at which the SAM-ICE is operating using the “Initial JTAG
speed” combobox. The “adaptive” setting should be used to get the best performance results
with AT91SAM7 microcontrollers and it is mandatory to use it with AT91SAM9 devices.
Figure 5-15. GDB Server Main Window
5.3.2 Creating a SRAM Configuration
In order to debug the project, the appropriate configuration must first be created in Eclipse. In
the “Run” menu, select the “Debug...” item to display the debug configuration management
window.