Datasheet

16
4341H–MP3–10/07
AT8xC51SND2C/MP3B
5.4 Registers
Table 5-1. CKCON Register
CKCON (S:8Fh) – Clock Control Register
Reset Value = 0000 000Xb (AT89C51SND2C) or 0000 0000b (AT83SND2C)
Table 5-2. PLLCON Register
PLLCON (S:E9h) – PLL Control Register
7 6 5 4 3 2 1 0
TWIX2 WDX2 - SIX2 - T1X2 T0X2 X2
Bit Number
Bit
Mnemonic Description
7 TWIX2
Two-Wire Clock Control Bit
Set to select the oscillator clock divided by 2 as TWI clock input (X2 independent).
Clear to select the peripheral clock as TWI clock input (X2 dependent).
6 WDX2
Watchdog Clock Control Bit
Set to select the oscillator clock divided by 2 as watchdog clock input (X2 independent).
Clear to select the peripheral clock as watchdog clock input (X2 dependent).
5 -
Reserved
The values read from this bit is indeterminate. Do not set this bit.
4 SIX2
Enhanced UART Clock (Mode 0 and 2) Control Bit
Set to select the oscillator clock divided by 2 as UART clock input (X2 independent).
Clear to select the peripheral clock as UART clock input (X2 dependent)..
3 -
Reserved
The values read from this bit is indeterminate. Do not set this bit.
2 T1X2
Timer 1 Clock Control Bit
Set to select the oscillator clock divided by 2 as timer 1 clock input (X2 independent).
Clear to select the peripheral clock as timer 1 clock input (X2 dependent).
1 T0X2
Timer 0 Clock Control Bit
Set to select the oscillator clock divided by 2 as timer 0 clock input (X2 independent).
Clear to select the peripheral clock as timer 0 clock input (X2 dependent).
0 X2
System Clock Control Bit
Clear to select 12 clock periods per machine cycle (STD mode, F
CPU
= F
PER
= F
OSC
/ 2).
Set to select 6 clock periods per machine cycle (X2 mode, F
CPU
= F
PER
= F
OSC
).
7 6 5 4 3 2 1 0
R1 R0 - - PLLRES - PLLEN PLOCK
Bit Number
Bit
Mnemonic Description
7 - 6 R1:0
PLL Least Significant Bits R Divider
2 LSB of the 10-bit R divider.
5 - 4 -
Reserved
The values read from these bits are always 0. Do not set these bits.
3 PLLRES
PLL Reset Bit
Set this bit to reset the PLL.
Clear this bit to free the PLL and allow enabling.
2 -
Reserved
The value read from this bit is always 0. Do not set this bit.