User's Manual

4
AVR0000
0001B-AVR-10/09
2.3 RCB231LPA v4.3.2
The RCB features the following user interface:
• (3) STATUS LED’s (LED_0 … LED_2)
• (1) Push Button (Button)
• (1) Power Switch (Sw)
Figure 2-3. RCB231LPA v4.3.2 – User Interface
Main components:
• AT86RF231, 2.4 GHz low power radio transceiver [2]
• uPG2314T5N, Power Amplifier
• ATmega1281, 8 bit AVR microcontroller
• AT25010A, EEPROM
• Antenna, Mobile Mark PSTG0-2400HS
The picture shows the RCB in OFF state. Note the different order or weighting of the
LED’s compared to the RCB shown in 2.1.
Figure 2-3 shows the RCB for illustration without shielding cover. However, the board
is manufactured, tested and shipped with shielding attached to the frame.