User's Manual

AVR2042
3
8334A-AVR-11/10
Figure 3-1. Atmel REB-CBB connected to an Atmel REB231ED with an RS232 cable
plugged in and an Atmel JTAGICE mkII programming interface.
4 Mechanical description
The REB-CBB is manufactured using a two-layer printed circuit board (PCB). All
active components are mounted on the bottom side, and all connectors and user I/Os
are located on the top side using through-hole components. The radio extender board
is plugged into the 2 x 20 female header, Expand1, vertically.
Figure 4-1. Mechanical outline.
5mm
70mm
18mm
60mm
57mm