User's Manual
Table Of Contents
30
AVR2043
8345A-AVR-11/10
A.4.2 Europe (ETSI)
If the device is incorporated into a product, the manufacturer must ensure compliance
of the final product to the European harmonized EMC and low-voltage/safety
standards. A Declaration of Conformity must be issued for each of these standards
and kept on file as described in Annex II of the R&TTE Directive.
The manufacturer must maintain a copy of the device documentation and ensure the
final product does not exceed the specified power ratings, and/or installation
requirements as specified in the user manual. If any of these specifications are
exceeded in the final product, a submission must be made to a notified body for
compliance testing to all required standards. The “CE“ marking must be affixed to a
visible location on the OEM product. The CE mark shall consist of the initials "CE"
taking the following form:
• If the CE marking is reduced or enlarged, the proportions given in the above
graduated drawing must be respected.
• The CE marking must have a height of at least 5mm except where this is not
possible on account of the nature of the apparatus.
• The CE marking must be affixed visibly, legibly, and indelibly.
More detailed information about CE marking requirements you can find at
"DIRECTIVE 1999/5/EC OF THE EUROPEAN PARLIAMENT AND OF THE
COUNCIL" on 9 March 1999 at section 12.
References
[1] AT86RF231; Low Power, 2.4GHz Transceiver for ZigBee, IEEE 802.15.4,
6LoWPAN, RF4CE, SP100, WirelessHART and ISM Applications; Datasheet;
Rev. 8111B-MCU Wireless-02/09; Atmel Corporation
[2] AVR2042; REB Controller Base Board – Hardware User Manual; Application
Note; Rev. 8334A-AVR-08/10; Atmel Corporation
[3] AVR2021; AT86RF231 Antenna Diversity; Application Note; Rev. 8158B-AVR-
07/08; Atmel Corporation
[4] IEEE Std 802.15.4™-2006: Wireless Medium Access Control (MAC) and
Physical Layer (PHY) Specifications for Low-Rate Wireless Personal Area
Networks (LR-WPANs)
[5] FCC Code of Federal Register (CFR); Part 47; Section 15.35, Section 15.205,
Section 15.209, Section 15.231, Section 15.247, and Section 15.249. United
States.
[6] ETSI EN 300 328, Electromagnetic Compatibility and Radio Spectrum Matters
(ERM); Wideband Transmission Systems; Data transmission equipment
operating in the 2.4GHz ISM band and using spread spectrum modulation
techniques; Part 1-3.
[7] ARIB STD-T66, Second Generation Low Power Data Communication
System/Wireless LAN System 1999.12.14 (H11.12.14) Version 1.0.
[8] AT25010A; SPI Serial EEPROM; Datasheet; Rev. 3348J SEEPR 8/06; Atmel
Corporation.