Manualshelf

Owner's Manual

ManualsBrandsATM ManualsCabinet & rack fansDual-mode Component Cooler
12345
\HUUH
Active
Thermal
Managemcnl
The trusted name in thermal protection
Instructions
for
installation
of
the Dual-mode Component Cooler™
Product Description
--
The
Dual-mode
Component Cooler is shipped in "Shelf', or "active
heat shield", configuration; it can
be
placed on top
of
a hot component wluch has ventilation
operungs in its top cover and will cool it while providing a shelf to support a second component
The second component is shielded from the heat generated by the lower component, allowing
more equipment to be placed on a shelf or within a bookcase.
Simply place the cooler on the lower (hot) component, then
place the preamp, CD player, or other component on top
of
the
Dual-Mode Component Cooler.
Base mode
Shelf
mode
When changed to "base" configuration,
1t
can be placed
beneath a satellite receiver,
DVR/PVR,
amplifier,
receiver
or
any
other heat-producing device
which
has ventilation openings
on
the
bottom surface. Its
quiet fans are powerful
enough
to force a gentle
stream
of
air
up
through
the
receiver and
out
the top
or
side openings, providing a substantial
cooling
effect.
In this mode
of
operation,
it
is
helpful to place foam
air
dams
on
the
top side
of
the
Dual-
mode
Component
Cooler
to force
the
air stream to go up into the receiver
and
not
escape
through the
space
between
the receiver and
the
Dual-mode
Component
Cooler; a length
of
adhesive-backed
foam
weather
stripping is supplied
with
each
Dual-mode
Co
mponent
Coo
ler. When installed,
the
foam should
not
allow
air
to
escape under the receiver.
Active Thermal
Management
Dual-Mode
Co
mponent Cooler
Page 1
of
4

Summary of content (5 pages)