Owner's Manual
75F
=
24C
85F
= 29C
95F
= 35C
80F
= 27C
90F
= 32C
100F = 38C
*Pressing the .&
or
°"
buttons again will cycle the display through the following
codes: P1, P2, P3, P4,
PS,
P6, and back
to
PO.
Many
of
these codes refer
to
parameters used in heating and refrigeration systems,
not
in cooling systems. Should
any
be
adjusted accidentally, restore them to their factory settings:
PO
- C (for "cooling")
P1
- Desired differential, set
as
described above
P2 - 110
P3 - -50
P4-0
PS
-0
P6-Off
Warranty
Active Thermal Management ("ATM") warrants the System against defects in
materials and workmanship for a period
of
five years from date
of
purchase.
We
will
repair
or
replace, at
our
option,
any
System which has a defect in materials
or
workmanship.
The
product being returned must
be
properly packaged and returned
prepaid with an ATM return authorization
number
clearly written on
the
outside
of
the
shipping carton and with a copy
of
the bill
of
sale
or
ATM invoice
to
verify the original
purchase date.
Our
warranty does
NOT
apply to:
1. Shipping damage, either concealed
or
visible. Claims must be filed with the
carrier.
2. Damage caused by improper installation
or
improper electrical voltage.
3. Any System which has been modified.
(661)
294-7999
voice
tech info@acti vetherma I.
com
(661)
294-1115 fax
\\
r
ww
.acti vethermal.com