Application Programming Interface

AT-OME-ST31A
8
Commands
Mreset
Resets the unit to factory-default settings.
Example
Mreset
Syntax
Mreset
Feedback
Mreset
This command does not require any parameters
PWOFF
Executing this command will power-o the unit. Execute the PWON command to power-on the unit.
Example
PWOFF
Syntax
PWOFF
Feedback
PWOFF
This command does not require any parameters
LRAUD
Enables / disables the audio on the analog audio output.
Syntax
LRAUD
Example
LRAUD o
Feedback
LRAUD o
Parameter Description Range
X Status on, off, sta