Application Programming Interface
AT-OME-ST31A
7
IPDHCP
Enables or disables DHCP mode on the unit. on = enables DHCP mode; o = disables DHCP mode; sta = displays
the current setting. If this feature is disabled, then a static IP address must be specied for the unit. Refer to the
IPStatic command for more information.
Example
IPDHCP on
Syntax
IPDHCP X
Parameter Description Range
X Value on, off, sta
Feedback
IPDHCP on
Commands
IPStatic
Sets the static IP address, subnet mask, and gateway (router) address of the unit. Before using this command,
DHCP must be disabled on the unit. Refer to the IPDHCP command for more information. Each argument must be
entered in dot-decimal notation and separated by a space. The default static IP address is 192.168.1.254.
Example
IPStatic 192.168.1.112 255.255.255.0 192.168.1.1
Syntax
IPStatic X Y Z
Parameter Description Range
X IP address 0 ... 255 (per byte)
Y Subnet mask 0 ... 255 (per byte)
Z Gateway (router) 0 ... 255 (per byte)
Feedback
IPStatic 192.168.1.112 255.255.255.0 192.168.1.1
Lock
Locks the buttons on the front panel. This feature is useful when the unit is installed in a rack environment or other
remote location, to prevent unauthorized tampering or accidental pressing of the front-panel buttons. Also refer to
the Unlock command.
Syntax
Lock
Example
Lock
Feedback
Lock
This command does not require any parameters