Application Programming Interface

AT-OME-ST31A
5
Commands
help
Displays the list of available commands. To obtain help on a specic command, enter the help command followed
by the name of the command.
Syntax
help [X]
Parameter Description Range
X Command name (optional) Command
Example
help
Feedback
Blink
CommaWait
DispBtn
System
IPCFG
IPStatic
...
...
InputStatus
Displays the status of the specied input as either a 0 or 1. If a source is detected on the input, then a 1 will be
displayed. Inputs with no source connected will display a 0.
Syntax
InputStatus
Example
InputStatus
Feedback
InputStatus 010
This command does not require any parameters