Application Programming Interface

AT-OME-ST31A
4
Commands
CommaWait
Adds a 5 second delay between commands, when a comma is included
Example
CommaWait on
Syntax
CommaWait X
Parameter Description Range
X Value on, off, sta
NOTE: The feedback will display channel status: 0 is no signal detected and 1 is signal detected.
DispBtn
Sets the command triggered through display control (set in the webGUI).
Syntax
DispBtn X
Example
DispBtn on
Parameter Description Range
X State on, off, tog, sta
Blink
Enables or disables blinking of the POWER button on the front panel. When set to on, the POWER button will ash
blue, and can be used to physically identify the unit on a network. The POWER button will ash until the Blink o
command is executed. on = enables blinking; o = disables blinking; sta = displays the current setting. The default
setting is o.
Syntax
Blink X
Parameter Description Range
X Value on, off, sta
Example
Blink on
Feedback
Blink on
Feedback
CommaWait on
Feedback
DispBtn on