Application Programming Interface

AT-OME-ST31A
13
Commands
Parameter Description Range
Y Input 1 ... 3
Z Output 1
Feedback
x3AVx1
xYAVxZ
Switches the specied input to the specied output. The rst argument references the input: 1 = USB-C,
2 = HDMI 1, 3 = HDMI 2. The second argument must always be 1. Both HDMI and HDBaseT outputs will output
the same source signal. Note that the feedback will display that the specied input is being routed to both output 1
(HDMI) and output 2 (HDBaseT), as shown below.
Example
x3AVx1
Syntax
xYAVxZ
xY$
Enables / disables video for the specied output. The rst argument references the output: 1 = HDMI, 2 = HDBaseT.
Syntax
xY$ Z
Parameter Description Range
Y Output 1, 2
Z State on, o, sta
Example
x2$ o
Feedback
x2$ o