Application Programming Interface

AT-OME-ST31A
10
Commands
RHostName
Displays the hostname of the unit.
Syntax
RHostName
Example
RHostName
Feedback
RHostName OMEST31-010C90
This command does not require any parameters
RS232zone
Sends commands to the HDBaseT device. Refer to the User Manual of the display device for a list of available
commands. Brackets must be used when specifying the command argument. The command line must not contain
any spaces. Since the AT-OME-ST31A has only one HDBaseT output (zone), “1” must be specied as the rst
argument.
Syntax
RS232zoneX[Y]
Parameter Description Range
X Zone 1
Y Command String
Example
RS232zone1[command]
Feedback
RS232zone1[command]
RepeatCmd
Enables / disables the RepCmdTime feature. Specify the sta argument to display the current setting.
Syntax
RepeatCmd X
Example
RepeatCmd on
Feedback
RepeatCmd on
Parameter Description Range
X Status on, off, sta