Manual

AT-HDVS-200-TX-WP / AT-HDVS-200-TX-WP-BLK

Appendix

Updating the Firmware

Updating the rmware can be completed using either the USB interface or the web GUI. Atlona recommends

using the web GUI for updating the rmware. However, if a network connection is not available, the AT-HDVS-200-

TX-WP rmware can be updated using a USB-A to USB mini-B cable

Using the Web GUI

Requirements

• AT-HDVS-200-TX-WP

• Firmware le

• Computer

1. Connect an Ethernet cable from the computer, containing the rmware, to the same network where the AT-

HDVS-200-TX-WP is connected.

2. Go to the System page (page 31) in the web GUI.

3. Click the Choose File button, under the Firmware Update section.

4. Browse to the location of the rmware le, select it, and click the Open button.

5. Click the Update button, under the Firmware Update section.

Choose File button

IMPORTANT: When updating the rmware, make sure to select the Choose File button under

Firmware Update. The Valens Update section does not apply to this procedure.