Manual

AT-HDVS-200-TX-WP / AT-HDVS-200-TX-WP-BLK
63
Commands
Type
Displays the model information of the AT-HDVS-200-TX-WP.
Syntax
Type
Example
Type
Feedback
AT-HDVS-200-TX-WP
This command does not require any parameters
Update
Places the AT-HDVS-200-TX-WP in rmware update mode. MCU = will update the MCU rmware, VSTX = update
the Valens rmware.
When placing the unit in update mode, it is recommended that the Using USB (page 68) procedure, outlined
under Updating the Firmware (page 67), be used. Executing this command can be used if the INPUT button is not
functioning or
Example
Update MCU
Example
VersionMCU
Syntax
Update X
Syntax
VersionX
Parameter Description Range
X Value MCU, VSTX
Parameter Description Range
X Value MCU, VSTX
Feedback
none
Feedback
V1.1.28
Version
Displays the current rmware version of the AT-HDVS-200-TX-WP. Do not add a space between the X parameter and
the command.