Manual

AT-HDVS-200-TX-WP / AT-HDVS-200-TX-WP-BLK
50
Commands
FreeRun
Enables or disables only audio to be sent from the transmitter to the receiver. on = enable, o = disable, sta =
displays the current setting.
Syntax
FreeRun X
Example
FreeRun on
Feedback
FreeRun on
Parameter Description Range
X Setting on, off, sta
IMPORTANT: Setting the Audio Freerun Status to ON is not recommended. When set to ON, both
video auto switching and display control are disabled.
HDCPSet
Set the HDCP reporting mode of the specied HDMI IN port. Some computers will send HDCP content if an
HDCP-compliant display is detected. Setting this value to o, will force the computer to ignore detection of HDCP-
compliant displays. Disabling this feature will not decrypt HDCP content. on = enables HDCP detection; o =
disables HDCP detection; sta = displays the current setting.
Syntax
HDCPSet X Y
Parameter Description Range
X Value 1 ... 2
Y Value on, off, sta
Example
HDCPSet 1 on
Feedback
HDCPSet 1 on