Manual

AT-HDVS-200-TX-WP / AT-HDVS-200-TX-WP-BLK
49
Commands
DispKeyLock
Locks the DISPLAY button on the front panel, preventing it from being accidentally activated. on = locks the
DISPLAY button, o = unlocks the DISPLAY button, sta = displays the current setting.
Display
Sends the “on” or “o” command to the display using the current protocol. Use the sta argument to display the
current setting. Refer to the DispCEC, DispIP, and DispRS command to set the protocol.
Syntax
DispKeyLock X
Syntax
Display X
Example
DispKeyLock on
Example
Display on
Feedback
DispKeyLock on
Feedback
Display on
Parameter Description Range
X Setting on, off, sta
Parameter Description Range
X Setting on, off, sta
DispRS
Enables or disables the display command protocol to RS-2232. on = enable RS-232, o = disable RS-232, sta =
displays the current setting.
Syntax
DispRS X
Example
DispRS on
Feedback
DispRS on
Parameter Description Range
X Setting on, off, sta