Manual

AT-HDVS-200-TX-WP / AT-HDVS-200-TX-WP-BLK
48
Commands
DispBtn
Simulates pressing the DISPLAY button on the front panel, activating the display mode and RS-232/CEC/IP display
control commands. on = simulates pressing the DISPLAY button to the “on” state, o = simulates pressing the
DISPLAY button to the “o” state, tog = reverses the current state of the DISPLAY button, sta = displays the current
setting.
DispCEC
Enables or disables the display command protocol to CEC. on = enable CEC, o = disable CEC, sta = displays the
current setting.
DispIP
Enables or disables the display command protocol to IP. on = enable IP, o = disable IP, sta = displays the current
setting.
Syntax
DispBtn X
Syntax
DispCEC X
Syntax
DispIP X
Example
DispBtn on
Example
DispCEC on
Example
DispIP on
Feedback
DispBtn on
Feedback
DispCEC on
Feedback
DispIP on
Parameter Description Range
X Setting on, off, tog, sta
Parameter Description Range
X Setting on, off, sta
Parameter Description Range
X Setting on, off, sta