Manual

AT-HDVS-200-TX-WP / AT-HDVS-200-TX-WP-BLK
42
Commands
AudioSrc
Sets the audio source for the each HDMI input. Parameter X species the HDMI port. Parameter Y species the type
of audio that will be used. Do not include a space between the AudioSrc command and the rst argument. Use the
sta argument, for parameter Y, to display the current setting of the specied port.
Example
AudioSrc1 ana
Syntax
AudioSrcX Y
Parameter Description Range
X HDMI IN port 1 ... 2
Y Audio type auto = Automatically selects the audio type
dig = Digital audio only
ana = Analog audio from the AUDIO IN port is
embedded on the output.
Feedback
AudioSrc1 ana
AutoDispO
Sends the command to power-o the display when an A/V signal is no longer present. Use the on argument to
enable this feature. Use the sta argument to return the current setting.
AutoDispOn
Sends the command to power-on the display when an A/V signal is detected. Use the on argument to enable this
feature. Use the sta argument to return the current setting.
Example
AutoDispO on
Example
AutoDispOn on
Syntax
AutoDispO X
Syntax
AutoDispOn X
Parameter Description Range
X Value on, off, sta
Parameter Description Range
X Value on, off, sta
Feedback
AutoDispO on
Feedback
AutoDispOn on