Manual

AT-HDVS-200-TX-WP / AT-HDVS-200-TX-WP-BLK
40
AnaGain
Sets the gain of the analog input.
Example
AnaGain 1
Syntax
AnaGain X
Parameter Description Range
X Audio gain 0 ... 16
Feedback
AnaGain 1
Commands
APwrOTime
Set the time interval, in seconds, before the command to power-o the display is sent, once an A/V signal is no
longer detected. Use the sta argument to display the current APwrOTime setting.
Example
APwrOTime 120
Syntax
APwrOTime X
Parameter Description Range
X Time interval 5 ... 3600, sta
Feedback
APwrOTime 120
Aspect
Sets the aspect ratio of the output signal. The default setting is Full. Use the sta argument to display the current
setting.
Example
Aspect 1
Syntax
Aspect X
Parameter Description Range
X Aspect ratio 0 = Full
1 = 16:9
2 = 16:10
3 = 4:3
4 = Keep Ratio
Feedback
Aspect 1