Manual

AT-HDVS-200-TX-WP / AT-HDVS-200-TX-WP-BLK
26
Display Mode
Click this drop-down list to select the display mode.
Setting Description
DispSW AVon Display switches on/o, source audio/video signal always on.
DispSW AVSW Display switches on/o, source audio/video signal switches on/o.
AV SW Display is always on, source audio/video signal switches on/o
The Web GUI
Volume / Mute
Click this drop-down list to select the control method for volume and muting.
Setting Description
AudOut Volume and mute buttons will control volume level of the output.
RS-232 Volume/Mute buttons will send the commands using RS-232 to compatible
extenders and displays.
IP Volume/Mute buttons will send the commands over Ethernet using the LAN
connection.
TCP/IP Settings of Controlled Devices
IP Mode
Click this drop-down list to select the control method for volume and muting.
IP Address
Enter the IP address of the display in this eld.
Port
Enter the listening port of the device in this eld.
Username
Enter the username for login.
Password
Enter the password for login.
Setting Description
Non-login Does not require a username and password when using TCP/IP to
control the display.
RS-232 Requires a username and password to control the display through
TCP/IP.