Manual

AT-HDVS-200-TX-WP / AT-HDVS-200-TX-WP-BLK
22
Audio page
The Web GUI
Audio Freerun Status
Audio can be passed, without the presence of a video signal. To enable this functionality, click the Audio Freerun
Status toggle to the ON position. To pass both video and audio, this toggle must be set to the OFF position.
Mute
Click this toggle to the OFF position to mute all audio on the output.
Output
Click and drag this slider bar to adjust the output audio volume. Range: -80 to 0.
Output Bass
Click and drag this slider bar to adjust the bass of the audio output. Range: -12 to 15.
Output Treble
Click and drag this slider bar to adjust the treble of the audio output. Range: -12 to 15.
HDMI Audio
These drop-down lists are only available when the system is in kit mode. Refer to Kit Mode (page 33) for more
information.
IMPORTANT: Setting the Audio Freerun Status to ON is not recommended. When set to ON, both
video auto switching and display control are disabled.