User Manual AtlonA Passive VGA Extender with Wall Plate or Box options up to 330ft over 1 x CAT5/6/7 Cable AT-VGA100-SR and AT-WPVGA-SR AT-WPVGA-SR Receiver Transmitter AT-VGA100-SR Receiver Transmitter
TABLE OF CONTENTS 1. Introduction .................................................. 3 2. Package Contents .................................................. 3 3. Features .................................................. 3 4. Specification .................................................. 4 5. Connection and Operation .................................................. 4 6. Mode Selection .................................................. 5 7. Dip Switch ...............................
INTRODUCTION The Atlona passive VGA Extenders over 1 x CAT5/6/7 cable up to the distance of 330ft with resolutions up to 1280x1024. The Atlona VGA Extenders are a perfect way of extending video signal away from the computer. The advanced design allows no limitations or delays when using extender versus a direct connection to the computer. There extenders can be mixed and matched with each other. The wall plate transmitter can be matched with “box” receiver and the other way around.
SPECIFICATIONS: Inputs Outputs VGA Type VGA Resolution Signal Bandwidth Signal Loss Transmitting Distance Dimensions (inch) Weight (lb) Operation Temperature AT-WPVGA-S 1 x VGA 1 x RJ45 AT-WPVGA-R AT-VGA100-S AT-VGA100-R 1 x RJ45 1 x VGA 1 x RJ45 1 x VGA 1 x RJ45 1 x VGA (HD15) female 800x600, 1024x768, 1280x768 and 1280x1024 300 kHz max. Less than 3dB per pair up to 330ft (100m) 2.75x2.40x4.52 2.75x2.40x4.52 4.3x3.03x1.02 4.3x3.03x1.02 – Single Gang – Single Gang 0.
MODE SELECTION Mode # 1: If your display is a projector or a new display 17-inch and up, please use Mode # 1 Mode # 2: If you are using a CRT monitor or a display under 17-inch, please switch to Mode # 2 DIP SWITCH Filter There are 5 dip-switchers on the receiving module. Each dip switch represents signal stability from 0 to 5, where #5 is the highest stability. The default mode is all dip-switchers are at the up position.
STP CONNECTOR STP Connector is used: Step # 1 ground cable Shielded Twisted pair cable (STP cable) ground cable (folded) - Must touch the Metal Housing Step # 2 STP RJ45 connector (Metal Housing) STP Connector is not used: Step # 1 ground cable Shielded Twisted pair cable (STP cable) Step # 2 6
WIRING CONFIGURATION RJ45 Pin Configuration: TIA/EIA 568B Wiring standard Video Cable 1. Orange-white 2. Orange 3. Green-white 4. Blue 5. Blue-white 6. Green 7. Brown-white 8. Brown Video Red + Video Red H-Sync Video Green + Video Green V-Sync Video Blue + Video Blue - Data Cable 1. Orange-white 2. Orange 3. Green-white 4. Blue 5. Blue-white 6. Green 7. Brown-white 8.
SAFETY INFORMATION Safeguards To reduce the risk of electric shock, do not expose this product to rain or moisture. If the wall plug does not fit into your local power socket, hire an electrician to replace your obsolete socket. Do not modify the wall plug. Doing so will void the warranty and safety features. This equipment should be installed near the socket outlet and the device should be easily accessible in case it requires disconnection.
1. LIMITED WARRANTY Atlona Technologies warrants that (a) its products (the “Product”) will perform substantially in accordance with the accompanying written materials for a period of 3 YEARS from the date of receipt and (b) that the Product will be free from defects in materials and workmanship under normal use and service for a period of 3 years. In the event applicable law imposes any implied warranties, the implied warranty period is limited to 3 years from the date of receipt.
