User Manual

@ 2020 ATLI EON copyright reserved

ATLI EON User Manual

ATLI EON can be upgraded via ATLI Cam App.

When there is ﬁrmware update, corresponding prompt will appear after

connecting the camera with ATLI Cam App, please follow the prompt to proceed

for upgrade.

During the updating process, the status LED light will ﬁrst ﬂash in orange, then

ﬂash in green, and eventually change to ﬂashing in red, which indicates the

completion of the update.

· A microSD card must be installed before upgrading the ﬁrmware.

· Be sure the camera to have sufﬁcient power left before upgrading the

ﬁrmware.

Updating Firmware

Camera:

Check out image ﬁles stored in the camera’s memory card.

Time Slice:

Compose photo sequence into time slice photo.

1. Camera album→ Photo Sequence folder → TimeSlice。

2. Select Time Range, Number of Slices, Direction and Style, then click start.

· Photo sequence output is required for time slice.

· At least 8 photo sequences are required for composing a time slice.

Display:

Select a sampling display for better viewing experience due to the large number

of sequences that may potentially exist.

TimeSlice:

Compose your unique time slice photo by selecting its Time Range, Number of

Slices, Direction and Style.

Time Range:

Choose its exact time range to be used for composing the time slice, down to

the second.

Number of Slices:

Choose the number of slices for composing the time slice.

View thumbnails of selected photo sequences.

View thumbnails of selected photo sequences. Swipe left or right to view all

photos. Swipe up to remove photos, swipe down to replace photos.

Direction:

Select the direction of the slices placement.

Forward – Slicing from left to right, or top to bottom.

Reverse – Slicing from right to left, or bottom to top.

Style:

Choose the style of the time slice.

Choose the style of the time slice. Vertical slicing, horizontal slicing, right oblique

slicing,or left oblique slicing.