Datasheet

Unique behavior

Atlas Scientiﬁc’s microprobe technology has some unusual properties.

If your Atlas Scientiﬁc micro ORP or reference probe have been allowed to dry out for an

extended period of time, it can be reactivated by placing the probe in a small amount

ORP storage solution. Let the micro probe sit for 1 hour.

Unaffected by drying

Reactivation of a dried probe

ORP probes need to be kept wet at all times. If an ORP probe is allowed to dry out, the

probe could be permanently damaged.

Atlas Scientiﬁc’s micro probes seem to be unaffected by drying. We have found that if a

micro ORP or micro reference probe is allowed to dry, the probe still works normally when

it's put back into water. We have seen that the probes can be stored dry for many months

without any change in performance.

We believe this is related to the unusually small amount of glass used at the tip of the

probe.

*Atlas Scientific does not recommend storing the probes dry.